Showing posts with label Scripts. Show all posts
Showing posts with label Scripts. Show all posts

Monday, 5 November 2012


     
Final Snapshot of the wizard after partitioning.




First of all,you have to partition your sd card.To do this:

  • Download Mini tool Partition Wizard from here.
  • Install the application on your windows PC and connect your sd card to the pc via a card reader.Your pc and the wizard will detect the sd card.
  • In the Mini Tool partition wizard,right click on your sd card and select delete.Note: Make sure you have backed up all the contents on your pc,as the sd card will be formatted during the process.
  • Now,you will have whole of the space on your sd card as unallocated.Right click on it and select create.
  • A popup will open,in that box,select the partition as primary,file system as FAT (if your sd card is below 4GB) or FAT32 (if your sd card is more than 4GB).
  • Leave about 512 MB or more space for the next partition.
  • Select done and right click on the unallocated space and again click create.This time too,select Primary but change the file system to Ext2,Ext3 or Ext4 (Ext2 is recommended as most ROMs work fine with it)
  • Click apply changes and the process will take a few minutes, let it complete.
After the partitioning process is done, install Link2sd from Google Play or download and install the apk from here.

On the first launch, it will ask for root permissions and then, it will ask you the file system of the ext partition, choose the option according to what you choose in the partitioning steps. Sort the apps according to size and start linking them and congrats, your phone memory is being freed.
Thus ,the new internal memory of your device = Your phone's default internal memory + Size of the ext partition you created above.
Benefits of it over the normal apps 2 sd feature is, even when you turn USB storage on, all the apps on your sd will keep working and so will be the widgets. And also, when you move apps to sd card normally, some part of the app is still on the phone memory. Linking the apps moves the full app to the sd card.
Now, the second part: Increasing your RAM.

Download Swapper for Root from Google play and select the amount of RAM you want to increase, let the application create the .swp file and voila, you're done.
Enjoy your superfast phone with loads of apps !!!
Note: Your ROM needs to support both these functions.Google your ROM name with "a2sd support" or "swap support" our something similar for more info specific to your ROM. Download swap check to see if your ROM supports swapping.
You might receive an error on your Android phone saying damaged sd card on your phone, repartitioning might solve the problem.
For further assistance, your comments are always welcomed. Post them below, no sign up


Note: To all those asking if this method will work on XYZ phone: The method I am describing below is a genetic method and supposed to be working on all devices. Internal memory increasing stuff should work on every Android device while extending RAM depends on whether you're ROM supports swapping or not, a method to check that is given in the post.

[ROM] Unofficial CyanogenMod 10 for many AllWinner A10 tablets



Supported tablets

* Mediacom 907c, Momo11 Bird, JXD S9000, Eken A90 (first revision) and clones need 907c_compatibility_1.2.x.zip.
* Visture V3 and clones need visturev3_compatibility_1.2.x.zip compatibility zip.
* Mediacom 910i, Teclast A10t and clones need 910i_compatibility_1.2.x.zip compatibility zip.
* ICOO D90W and clones need d90w_compatibility_1.2.x.zip compatibility zip.
CEMA10N7 "unknown" device needs cema10n7_compatibility_1.2.x.zip compatibility zip.
* Bmorn V99 needs v99_compatibility_1.2.x.zip compatibility zip
* Mediacom 711i, Momo9 and clones need 711i_compatibility_1.2.x.zip compatibility zip
* Protab2XXL needs protab2xxl_compatibility_1.2.x.zip compatibility zip
* Sanei N83 needs n83_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)
* Hyundai A7HD needs a7hd_compatibility_1.2.x.zip compatibility zip
* MOMO9 needs momo9_compatibility_1.2.x.zip compatibility zip
* Onda Vi40 V3 needs vi40_compatibility_1.2.x.zip compatibility zip
* LY-F1 and clones need lyf1_compatibility_1.2.x.zip compatibility zip
* Protab2XXLv2 needs protab2xxlv2_compatibility_1.2.x.zip compatibility zip
* TNT Singularity and clones need singularity_compatibility_1.2.x.zip compatibility zip
* Eken T01 needs t01_compatibility_1.2.x.zip compatibility zip
* Eken T02 needs t02_compatibility_1.2.x.zip compatibility zip
* Eken T05a V1 needs t05a-v1_compatibility_1.2.x.zip compatibility zip
* Eken T05a V2 needs t05a-v2_compatibility_1.2.x.zip compatibility zip
* Eken T05a V3 needs t05a-v3_compatibility_1.2.x.zip compatibility zip
* Eken T05a (unknown version) needs t05a-unk_compatibility_1.2.x.zip compatibility zip
* Eken T10 needs t10_compatibility_1.2.x.zip compatibility zip
* Eken T10 with mxc622x g-sensor needs t10-2axis_compatibility_1.2.x.zip compatibility zip
* Sanei N10 needs n10_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)
* Onda Vi30 Deluxe V3 needs vi30-deluxe-v3_compatibility_1.2.x.zip
* Onda Vi40 Ultimate needs vi40-ultimate_compatibility_1.2.x.zip
* Onda Vi10 Elite needs vi10-elite_compatibility_1.2.x.zip
* Ainol Novo7 Elf needs elf_compatibility_1.2.x.zip
* Sanei N83 Deluxe needs n83-deluxe_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)
* Ainol Novo7 Aurora v3 needs aurora_compatibility_1.2.x.zip compatibility zip (you find it in 3rd_party section)

Tablets supported with legacy support (see FAQS section for more infos)

* Mediacom 917i and 927i need 917i-927i_legacy-compatibility_vX.zip comp zip
* Gemei G2 needs g2_legacy-compatibility-jb_vX.zip comp zip
* Gemei G9 (those not working fine with "regular" 907c comp zip) needs g9_legacy-compatibility-jb_vX.zip comp zip
* Sanei N90 needs n90_legacy-compatibility-jb_vX.zip comp zip
* Ainol Novo7 Aurora v1 and v2 need aurora-v1-v2_legacy-compatibility-jb_vX.zip
* MK802 PC-on-a-stick needs mk802_legacy-compatibility-jb_vX.zip

You can check "testing" section of my AndroidFileHost space to find out few more tablets that require some testing to be approved

You can get them on this website



Known Bugs



Features

* Bluetooth USB dongle support (btusb and ath3k)
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* NTFS and ExFat support
* Veno congestion control algorithm



Instructions

* !!! IMPORTANT !!! You need a /system partition of at least 300 MB or you have to avoid flashing gapps !!! IMPORTANT !!!
* Upload zips to MicroSD or internal memory.
* Boot into CWM keeping pressed VOL- (MENU) and POWER for 3 secs, than release POWER and after another sec release VOL- (or use Novo7 tools if it doesn't work for your device)
* Select "wipe data/factory reset"
* Select "install zip from sdcard" -> "choose zip from sdcard" (or "choose zip from internal sdcard" if your files are into internal memory) and flash, in this order, rom / gapps / compatibility zip
* Now go back, and select "Reboot system now"
* Enjoy cm10

Note: when you update to a newer build you don't need to do a full wipe, you just have to wipe cache and dalvik cache



Changelog

build 2012-09-13

*** This will be the latest release. Rom development is now discontinued since I moved to other SoCs ***
* Spoofed as Nexus 7 (if you have any trouble with Play Store clear both "Google services framework" and "Google play store" data)
* Fixed FC on license check of some games (specially gameloft one)
* Fixed camera picture capture
* Bluetooth dongle now supports hotplug
* Different options under "Settings" if you're using tablet or phablet UI (for example to customize status bar toggles)
* Experimental: older surfaceflinger library, let's see if it really improves performance with some games or it is only placebo
* Re-added move 2 internal SD feature
* Updated upstream sources



Gapps

2012-07-26



FAQs

* HW accelerated playback of local contents is limited to few files format but there's a nice workaround: since network playback works flawlessly we'll install an UPNP server that will automatically open our files from the loopback network interface. In this case stagefright player will kick in and will play every file without any trouble.
Install both MX Player and BubbleUPNP from Play store. Open BubbleUPNP and from "Library" section select the file to play. Choose MX Player as default player and enjoy the HW accelerated video playback
* If you wanna use the "phablet" ui change the entry "ro.disable_phablet_ui=1" to "ro.disable_phablet_ui=0" in file /system/build.prop (note that USB connection will work only in "phablet" mode)



Sources

Github repository

Code:
repo init -u git://github.com/CyanogenMod/android.git -b jellybean
paste these lines inside file ".repo/manifests/local_manifest.xml
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
  <remote  name="github" fetch="git://github.com/" />
  <remove-project name="hardware/libhardware"/>
  <remove-project name="frameworks/av"/>
  <remove-project name="frameworks/native"/>
  <remove-project name="frameworks/base"/>
  <remove-project name="system/core"/>
  <remove-project name="system/vold"/>
  <remove-project name="system/bluetooth"/>
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_device_907" path="device/softwinner/907" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_hardware_realtek" path="hardware/realtek" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_hardware_libhardware" path="hardware/libhardware" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_frameworks_av" path="frameworks/av" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_frameworks_native" path="frameworks/native" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_frameworks_base" path="frameworks/base" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_system_core" path="system/core" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_system_vold" path="system/vold" />
  <project remote="github" revision="jellybean-cm" name="christiantroy/android_system_bluetooth" path="system/bluetooth" />
</manifest>
now type this command
Code:
repo sync -j8
finally you're ready to build it
Code:
lunch cm_907-userdebug && mka


Screenshot

Sunday, 24 June 2012

SUPERSCRIPT [ ROOTING] RECOMENDED




                           SUPERSCRIPT TO ROOT A10 DEVICES 
          [TRUSTED & RECOMENDED FOR ANY A10 TABLET WITH ICS]


Download Link: AndroidTabletFirmware.com - Tasselhof - STOCK - Root, Market, Build.Prop, & Tweaks Script - AllWinner A10.rar
- If you get a file that just says "Tasselhof"... rename it to "Tasselhof.rar".

Alternate Link: Mediafire.com - Tasselhof - Root, Market, Build.Prop, & Tweaks Script - AllWinner A10.rar






**PLEASE NOTE**
This script was created and tested based on the Gemei G9 Stock firmware 4.0.3 v4.10 dated 2012-03-23.
It should work on the other firmwares without issue.


AS ALWAYS - PROCEED AT YOUR OWN RISK

Here is the script Menu when you run it:

Quote
Make sure to enable USB Debugging on the tablet
- Settings -) Applications -) Development -) USB debugging (green checkmark)
'
1. Check Tablet Connection
2. ROOT - Gemei G9 - Using Transformer ROOT Script
3. Install Google Play (Android Market), GAPPS, and Sync
4. Replace the Build.Prop to enable additional apps in market
'
***** ADDITIONAL OPTIONS *****
5. Install System Tweaks and Files
'
***** DISABLE/ENABLE SYSTEM SERVICES *****
6. Disable Services to Increase Battery Life
- Such as: Phone, 3G, Bluetooth, Provision, VPN
7. Re-Enable All Services
8. Enable Only 3G Services
9. Enable Only VPN Services
'
10. Quit and Reboot Tablet (Preferred)
'
Choose Option (1 thru 10):


Here are what the options will do:

1.) Verifies that the tablet is connected and recognized by the system
2.) Runs the Transformer ICS ROOT script which has been confirmed to work with the MOMO11 bird firmware (this will reboot the tablet a couple times)
3.) Install the Google Play Market and missing /System/app "GAPPS"
4.) Replaces the existing Build.Prop with a modified and tweaked one that contains a Market Key based off of the Samsung Galaxy SII (should open up more app compatibility)
5.) Installs various system tweaks and settings (purely optional to run)
6.) Disables the Phone and VPN services to attempt to increase battery life
7.) Enables the services disabled in number 6
8.) Selectively enables only the phone/3G aspects
9.) Selectively re-enables the VPN aspects
10.) This will close the command prompt window and reboot the tablet, which I advise you do if you ran options 3, 4, and 5

Here are my detailed instructions for what to do after flashing the firmware to your device to get it to a "normal" English state:



1.) (OPTIONAL) Install with format the Gemei G9 Stock ICS 4.0.3 v4.10 firmware
2.) Boot the tablet and connect it to USB.
3.) Click the Blue Square button (to cancel the tutorial)
4.) Change the language to English

a.) Click on the Time (give it a second to come up)
b.) Click on the Settings Icon below the popped up time (three lines with sliders)
c.) Click on the Settings Icon at the bottom of the popped up list (same icon)
d.) Scroll down the Left Hand side and click on the icon with an A
e.) Click the first field on the right hand side
f.) Select your preferred language (for me it would be English (United States)
5.) Change the Default Keyboard in the same settings page as lanuage
a.) Click on Default
b.) Click on English (US) - Android keyboard
6.) Set the Date, Time, and Time Zone
a.) Click on Date & Time along the left hand side of the settings
b.) Uncheck Automatic Time Zone
c.) Click on Select time zone and set it to yours
d.) Verify the time is correct and change it if needed.
7.) Configure the Wireless Settings
a.) Scroll up to Wi-Fi on the left of settings
b.) Turn on Wi-Fi with the toggle switch
c.) Connect to your Wireless Network
8.) Exit the Settings

Now we use the script!

1.) Download the script file: LINK and extract the folder
2.) Ensure your tablet is connected by USB to the top MicroUSB port (near headphone jack)
3.) Double click on: !RUN-ME-Tasselhof-Root-Market-Tweaks.bat
4.) Use Option 1 (verify the tablet connection)
5.) Use Option 2 (ROOT the tablet, will reboot twice)
6.) Use Option 3 (Install Market and GAPPS)
7.) Use Option 4 (Update Build.Prop)
8.) Use Option 5 (Install Tweaks and Files)
9.) Use Option 6 (Disable unused services)
10.) Use Option 10 (Close and Reboot the Tablet)
You are now all done and should have a relatively blank slate to start from.
You will be prompted to configure your Google account when you open the Android Market.


Updated 04-10-2012 - Added in additional GAPPS.
GalleryGoogle.apk
GoogleBackupTransport.apk
GoogleCalendarSyncAdapter.apk
GoogleContactsSyncAdapter.apk
GoogleFeedback.apk
GoogleMaps.apk
GoogleQuickSearchBox.apk
MarketUpdater.apk
MediaUploader.apk
NetworkLocation.apk
Talk.apk
VoiceSearch.apk
YouTube.apk


Enjoy!
CREATOR
Tasselhof ,Ivanz, & Almaz's
SOURSE;-INTERNEt

[NETFLIX FIXED!!] Simplified V6 Supercharger for Allwinner A10 ICS[RECOMMENDED!]


[NETFLIX FIXED!!] Simplified V6 Supercharger for Allwinner A10 ICS[RECOMMENDED!]

Tested on my PMID701c (A10 TABLET) ICS rom, and I must say there has been a VERY NOTICABLE boost in performance! However, the best part about applying this for me has been NetFlix from the market is now 100% working with 0 audio sync issues!!  

RECOMENDED
ICS needing NetFlix to work properly do this right away,

Download: http://www.mediafire.com/?9gqiwr9x9xl95

V6_SUPERCHARGER FOR ALLWINNER A10 ICE-CREAM-SANDWICH TABLETS.

PLEASE READ THE GUIDE CAREFULLY BEFORE APPLYING THE SCRIPT.

================================================== ===================================
FEATURES:
1. Smooth and Fast Re-Draw of UI and Internet Browser.
2. Complete Memory Management Script. Not a Junk Android Manager.
3. No need for those crappy Android Task Killers applications.
================================================== ===================================
REQUIREMENTS:
1. Fully Rooted with Superuser and BusyBox 1.19.4. If you install Root-Script:
2. Please update BusyBox Free (Stericson) to v7.8.2 on PlayStore.
3. Proceed to BusyBox Installation. Install BusyBox 1.19.4 to SYSTEM/BIN directory.
4. Reboot Tablet.
5. Launch SuperUser and goto Preferences. Tap "SU Binary Update"
6. It will fail on 1st time, just "Try Again" until all text are "Green"
7. Reboot Tablet.
8. Internet Connection for PORN! -LoL
================================================== ===================================
INSTRUCTIONS: 
1. Connect Tablet to PC powered-ON and enable USB Debugging & Stay Awake.
2. Run V6_SuperCharger-Pull-Push-Script and Follow Instructions.
3. Select Option-#1 first and when done, do not EXIT the Script yet!
4. Upload Services.jar inside "ICS/default" folder to HTTP://ANDROID.MIMIC.CA
5. Download the Modified Services.jar and put inside "ICS/modified" folder
6. Proceed to Option-#2 and Reboot Tablet.

7. On your Tablet, download and install "Script Manager by DevWom".
8. Launch Script Manager and tap "Browse as Root" and check "Do not ask again".
9. It should ask for SU Permissions. If not, the script won't work.
10. Locate the "V6_SuperCharger_Update9.sh.pdf" and tap to open using Script Manager.

11. Once you get on V6_SuperCharger_Update9.sh.pdf menu, TAP to ENABLE [SU]
12. Leave the OTHER options at DEFAULT. Hold your Tablet to PORTRAIT MODE.
================================================== ===================================
V6_SUPERCHARGER MENU #1: BASIC SETTINGS
1. TAP the [RUN] button. V6_SuperCharger_Update9 Script will now RUN.
2. If asked for "Scrolling Speed", select [FAST]- Type= 1
3. If asked to "Disable Animation", select [YES]- Type= Y
4. If asked to "Apply SuperMinFree Calculator Settings", select [YES]- Type= Y
5. Follow the succeeding "Script Instructions" and it will ask if you want:
6. TO perform "SuperClean and Restart", select [YES]- Type= Y
7. Tablet may look like in Boot-Loop, but it is not. Just Try ON/OFF atleast 3x.
8. If successful, you can skip performing V6_SuperCharger Menu #2.
================================================== ===================================
V6_SUPERCHARGER MENU #2: ADVANCED SETTINGS
1. TAP the [RUN] button. V6_SuperCharger_Update9 Script will now RUN.
----------If asked for "Scrolling Speed", select [FAST]- Type= 1
----------If asked to "Disable Animation", select [YES]- Type= Y
----------If asked if "Launcher is at Home", select [YES]- Type= Y
----------Press any Key to Continue. If Browser pops-up, just press BACK once.

2. On V6_SuperCharger MENU, select [SuperCharger & Launcher]- Type= 1
3. Wait until it finish and Press any Key if asked to do so.
----------If Browser pops-up again, just press BACK once.
----------You'll be redirected again to V6_SuperCharger Menu.

4. On V6_SuperCharger MENU again, you have the Following Options:
----------If Tablet has 512MB RAM, Select [Super UL -512 HP] Type= 7
----------If Tablet has 1GB RAM, Select [Super UL -1000 HP] Type= 9

5. Wait until it finish and Press any Key if asked to do so.
6. You'll see something like "100% SUPERCHARGED" if its Successful
----------Select [SuperClean and Restart]- Type= 30

7. Tablet may look like in Boot-Loop, but it is not. Just Try ON/OFF atleast 3x.
----------We're not DONE YET! Please proceed to next Instructions:
================================================== ===================================
LOAD 99SUPERCHARGER.SH ON BOOT:
1. Launch Script Manager and press Back Key twice until you reach [/] Directory.
2. Open /Data and look for 99SuperCharger.sh, tap it to select and run using Script Manager.
3. Select [SU] and [Boot] and hit the RUN button. After finish, just close it.
4. Enjoy V6_SuperCharger - Super-Saiyan Mode.

5. Do not uninstall Script Manager. It is used by 99SuperCharger.sh every Boot-up.
================================================== ===================================
DEVICE NOT FOUND ERROR?:
1. Extract USB_Driver to a Folder and Connect Tablet to PC powered-ON.
2. Go to Device Manager. Check for an Android Device with Exclamation Point [!].
3. Right-click Android Device and click Update Driver. Locate the USB_Driver Folder.
================================================== ===================================

Chainfire 3D Pro | PLUGINS | TUTORIAL


Chainfire 3D Pro Apk, plug-ins & Pro license Downlaod.

DownloadChainfire 3D Pro Apk, 

plug-ins & Prolicense How toinstall Chainfire 3D to any android devices tutorial! (recommended for Galaxy mini, Galaxy y, Galaxy fit etc)  Chainfire3D - Take control of your GPU OpenGL!Take control over your GPU! Chainfire3D is an intermediary OpenGL driver.
What does that mean
It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.

 ROOT is required for this program, as well as a writable /system partition. S-OFF is also required on HTC devices
Features include reducing texture size and quality to reduce memory use and potentially increase game performance, as well as increasing memory use potentiallyincrease performance.
If you also install the (experimental) EGL driver, AND your GPU supports it, AND you have the Pro version, you can enable 4xMSAA or 16xMSAA on a per-app bases. This can drastically improve image quality!


How to install Chainfire 3D | PLUGIN | USE
How to Install:

1) Install Chainfire 3D apk
2) Install Chainfire 3D pro(license) apk
3) Chose a Plug-ins file, unpack it in SD.
4) Open chainfire3D then allow super user.
5) Select the CF3D Driver, and then Install. Phone restarts.
6) Start the Chainfire3D and select the item Install plugin.
7) Wait till it found plug-ins .zip file
8) Install       libGLEMU_POWERVR.zip (for PowerVR)
                    libGLEMU_NVIDIA.zip (for Nvidia)
                    libGLEMU_QUALCOMM.zip (for Qualcomm)
9) Fix market setting
10) After this, go to Default OpenGL settings -> Use plugin
11) Choose POWERVR/Qualcomm/Tegra (according to your GPU or Certain games)
12) Minimize Chainfire3D

Thats it! We are done installing Chainfire 3D!

Download: Chainfire 3D apk with plugins, instruction.



(Install Chainfire 3D apk first then install Chainfire 3D Pro license apk) 

Compatible devices: Its working on all modern android devices.
Recomended for  low end phones like GALAXY Y ,GALAXY FIt,WILDFIRE et
c

ROOTING A10 TABLET

 Android Market script for ICS 4.0.3. It should unlock most of the applications from Android Market 

Market v3.4.4
Unlocks all applications in market suitable for Samsung Tablet
Added YouTube, Google Search, Google Talk and Google Maps
Should improve battery drain over stock firmware
Added an option to disable phone, sms and bluetooth services (optional)
Increased WiFi scan interval to save battery
Improves battery drain in standby mode by putting all the hardware to sleep mode
Improves JPEG and Video quality. 
Forces video hardware render in UI
Increased WiFi buffer size 
Disabled debugging notify icon on statusbar
Disabled Error Checking for applications
Increased scrolling responsiveness

Directions:
Download zip file
Unzip it
Connect USB cable to your Tablet
Make sure it found drivers otherwise point to folder Drivers in the package which includes 32bit and 64bit drivers.
Set display Sleep to 30 min (Goto Settings > Display > Sleep > 30mins)
Enable USB Debugging (Goto Settings > Developer Options > USB debugging)
NOTE: IF YOU ARE UPDATING THE SCRIPT THEN (Goto Settings > Apps > ALL > Google Services Framework > Force Stop > Clear data)
Click RunMe.bat and follow directions.
Set display Sleep back to 1 min
Click on Market and login with your Email.
reboot tablet again
Start Market install something from the market and close the market. Open Market and you should Accept Market terms of Service and that's it. 

How to properly ROOT
Directions:

From market install Superuser and open the program. Go to Preferences and click on (Su binary vnull tap to check for updates) click update
Reboot Tablet
From Market install BusyBox Installer JRummy16. Open it, click Allow and install first to /System/Xbin directory and then install to /System/Bin directory
Reboot Tablet
Set display Sleep to 30 min
Connect USB cable to your Tablet
Run RootMe.bat 

Enjoy


F.A.Q.

Q. Menu button stopped working or is not responding.
A. It happens when you install busybox and do not follow my directions how to properly Root

Q. Device shows it is not rooted.
A. It happens when you install busybox and do not follow my directions how to properly Root

Q. ICS lagging
A. Goto Settings > Developer options > UNCHECK Force GPU rendering

Q. Browser feels laggy.
A. Install boat browser from market

Change Log

Version 0.4
Unlocks even more applications from Market such as TuneIn Radio, GTA and etc.
Disabled debugging notify icon on statusbar
Disabled Error Checking for applications
Increased scrolling responsiveness which was removed from 0.1

Version 0.3
Added root script.

Version 0.2
Reverted touch screen sensitivity back to stock.


DOWNLOAD: